The control panel inside the door of a stainless upright freezer, a small lock symbol and a fast freeze symbol lit, the shelves below stocked with wrapped food.

Gaggenau RESTMODE on a freezer column: light, sound and ice maker off

When RESTMODE shows and VACATION flashes, the Vario freezer column has switched off its ice maker, acoustic signal, interior light and display messages, and locked the buttons.

(844) 456-4651

Mon–Sat, 8am–8pm

  • Mode, not a failure
  • No repair needed
  • Source: Gaggenau

Book a visit

Three short steps, about a minute.

or call (844) 456-4651

Before you book,
in this order.

Each step comes from Gaggenau's own guidance for RESTMODE on its freezers. Follow it to the end: the last card says whether this is a visit.

01

Press the Holiday button to leave Rest mode; the previous settings return.

02

Check the food and the temperature afterward, since warnings were silent while the mode was on.

03

If the light or ice maker still do not work after leaving the mode, book a visit.

Cleared?

The freezer is holding its temperature again and no part had to be replaced. If the same code comes back within a few days, or the packages start to soften again, book it as a fresh problem.

What not to do

A dark interior and a silent ice maker during RESTMODE are expected. They are not failures of the lamp or the ice maker.

What you may
notice with it.

The freezer problems RESTMODE tends to arrive with. Answer these at the freezer before anyone is booked.

All problems

No repair indicated

Nothing to repair.

A setting the freezer was put into, often by accident or by the store it came from, rather than a part that broke: a showroom or demo mode that lights the display while the compressor stays off, a fast freeze left running for days, a Sabbath setting that silences the alarms, a control lock, a door alarm reminding you the door stood open. Nothing has worn out, and the freezer's own buttons or manual put it back.

In Gaggenau's own words

The symbol VACATION flashes on the display panel and RESTMODE is displayed.
Gaggenau Instruction for Use, freezer RF 411, RF 413, RF 461, RF 463, RF 471

Every code on this site is taken from the manufacturer's documentation, never from a forum or a parts listing. Gaggenau Vario RF 411, RF 413, RF 461, RF 463 and RF 471 freezer columns (instruction 9000909130). The newer Vario cooling Expressive freezers have no published message list.

Gaggenau RESTMODE freezer repair,
where we come out.

The same visit in every metro below: the code, the model number, and a diagnosis before any part is ordered.

All service areas
A parent and a child packing summer berries into bags beside an open upright freezer in a tidy garage
For the heart of your home.

Questions
about RESTMODE.

Can I clear RESTMODE myself?
Press the Holiday button to leave Rest mode; the previous settings return.
Why is my Gaggenau freezer dark and silent with RESTMODE on the display?
Rest mode switches off the light, the sound and the display messages on purpose. Press the Holiday button to return to normal.
Does a Gaggenau freezer still freeze in Rest mode?
Yes. Rest mode switches off extras such as the ice maker and light, not the cooling.
Why won't my Gaggenau column buttons respond in Rest mode?
The buttons are locked while Rest mode is on. The Holiday button still ends the mode.

Back to your everyday

Still showing RESTMODE?

Book with the code or the alarm pattern written exactly as the freezer shows it, the full model number, and whether the food is still frozen hard — when there is a code, that is where the diagnosis starts.

(844) 456-4651 Schedule a repair